FB Pixel

(817) 863-0747

MillionAire Heating & Cooling Q&A

Keeping Your Heating System In Its Best Condition After The Installation

Keeping Your Heating System In Its Best Condition After The Installation

It takes more than just installing a new heating system to keep your home warm and comfortable during the colder months. Regular heating maintenance is essential to avoid costly repairs and disruptions in service. 

In this blog, you will find all the important information you need to know about ensuring your heating system stays in its best shape for years to come. It will cover the following:

  • How to maintain a heating system
  • Whether or not you should schedule a heating maintenance after the unit has been installed
  • The benefits of regular heating maintenance

How Do I Maintain My Heating System?

Here are a few tips on how to maintain your heating system so it will keep you warm all winter long: 

Keep The Unit Clean

Dirt and dust are the enemies of your heating system. A little bit of dust is inevitable and fine, but too much will wreak havoc on your unit. So you should do your best to keep the unit as clean as possible. 

Dust and dirt can build up over time and cause your unit to work harder than necessary. Your system will become less efficient, and your energy bills will likely skyrocket. Worse, neglecting your equipment may end up with you needing a heating installation in Bedford, TX, sooner than you’d like. 

Therefore, make sure the unit stays clean. Regularly vacuum around the unit’s base and wipe the exterior with a damp cloth. If there’s an outdoor unit, clear any debris that might have accumulated around it. But don’t attempt to clean the interior if you don’t have the knowledge and tools because they can be damaged easily.

Regularly Replace The Filters

No air filter lasts forever after the heating installation in Bedford, TX. While some nowadays could last for at least a year, most still need to be replaced every three months. Other air filters may even require replacement more often. 

Check with the manufacturer of your heating system to see how often the filters need to be replaced. 

It is best to work on replacing the filters diligently. Clogged filters won’t only make your heating system work harder but can also cause the unit to overheat and break down. It will also affect the quality of your indoor air. 

Bleed The Radiators At Least Once A Year

While radiators can stay efficient and effective after the heating installation in Bedford without too much ongoing maintenance, you should perform a few key tasks every year to keep things running smoothly. One of the most important is bleeding the radiators. It will help remove any air that might have gotten trapped in the system and is causing the radiators not to heat up properly.

To bleed a radiator, start by turning off the heating system. Then, locate the bleed valve on the radiator and use a radiator key to open it. You should hear a hissing sound as the air escapes. Once the water starts to flow out of the valve, close it tightly and turn the heating system back on. 

You can always ask your trusted HVAC contractor to do this for you.

Keep the Vents/Registers Free of Obstructions

Experts in heating installation in Bedford, TX, may install vents/registers in low-traffic areas in your home that are easily forgotten. Over time, however, these areas can become cluttered with furniture, boxes, or other items. As a result, the airflow to these areas can be restricted, making your heating system work harder than necessary.

To prevent this from happening, make it a habit to check the vents/registers in your home and clear any obstructions that might be blocking the airflow. 

Reduce your Property’s Heating Load

Your technician will size your heating system during your installation in Bedford, TX. It is based on your home’s square footage and other factors such as insulation levels, number of windows, etc. However, a few things could increase your home’s heating load over time, such as air leaks or drafts, which can strain your system.

Seal any gaps or cracks around doors and windows to reduce your heating load. You can also add weather stripping or caulking to prevent further drafts. And if you have a fireplace, ensure the damper is closed when it’s not in use.

Schedule a Professional Heating Maintenance At Least Once A Year

Do-it-yourself maintenance can only do so much. Your heating system will still need professional tune-ups to ensure the unit runs efficiently even years after your installation in Bedford, TX. 

Schedule a heating maintenance check with your contractor before the start of winter. You may need to schedule twice a year if you have something like a heat pump that works all year round. Routine maintenance will help identify any potential problems and prevent them from becoming bigger and more costly issues.

Should You Schedule A Heating Maintenance After The Unit Has Been Installed?

Some people let years after their heating installation in Bedford, TX go by without having a maintenance appointment.  While it might seem like the unit can go years without any issues, that’s not always the case. The best way to help ensure your heating system lasts for years is to schedule regular maintenance appointments.

If you just had your heating installation in Bedford, TX, completed, you might wonder if you should schedule a maintenance appointment. The answer is yes! It’s always best to err on caution when it comes to your heating system. By scheduling a maintenance appointment, you can ensure that your system is running properly and catch any potential issues early on.

If you’re unsure how often you should schedule a maintenance appointment, talk to your heating contractor. They will be able to give you a general idea of how often you should have your system serviced. In general, having your system checked at least once a year is a good idea. However, if you live in an area with extreme weather conditions, you might need to have it serviced more often.

The Benefits of Regular Heating Maintenance

After your heating installation in Bedford, TX, your technician probably advised you to get regular maintenance done on your system. It’s not just for the sake of the business; it’s for the sake of your home comfort and safety! Here are some benefits of regular maintenance:

1. Improved Efficiency

Your furnace has to work harder when it’s not well-maintained, which costs you more money in utility bills. By keeping up with maintenance, you can be sure that your furnace is always running at peak efficiency.

2. Longer Lifespan

A well-maintained furnace will last longer than one that isn’t, so you won’t have to shell out for a new heating installation in Bedford, TX, as soon as you would if you skipped maintenance.

3. Fewer Repairs

When you keep up with maintenance, there’s less chance that something will go wrong with your furnace. It means you will only have to pay for repairs sometimes, if at all.

4. Safer Operation

A furnace that isn’t maintained can be a fire hazard. By keeping up with maintenance, you can be sure that your furnace is always safe to operate.

5. Better Air Quality

When your furnace isn’t maintained, it can circulate dust and other particles through your home. It can be bad for your lungs, especially if you have allergies or asthma. By keeping up with maintenance, you can be sure that your furnace is always circulating clean air.

Regular heating maintenance is essential for your home’s comfort, safety, and efficiency. Be sure to schedule maintenance with a qualified technician at least once a year.

Call MillionAire Heating & Air Conditioning For Reliable Heating Services in Bedford, TX!

Whether you need help with heating installation in Bedford, TX, or maintenance, you can count on the MillionAire Heating & Air Conditioning experts. We have more than a decade of experience in the industry, and we’re dedicated to providing our customers with the best possible service. We offer a wide range of heating services, so you can be sure we have what you need.

When you choose us for your heating installation in Bedford, TX,  we’ll make sure the job is done right the first time. Our technicians are highly trained and experienced, so you can be confident that your installation will go smoothly. We’ll also take the time to explain the installation process to you and answer any questions.

We also offer a wide range of heating maintenance and repair services. If you’re having trouble with your furnace, we can come out and take a look.  We’ll diagnose the problem and give you a fair estimate for the repairs. We’re always upfront about pricing, so you won’t have to worry about hidden fees.

If you’re looking for reliable heating services in Bedford, TX, call our MillionAire Heating & Air Conditioning team at (817) 863-0747 today or fill out our online form to request a service.

HVAC Service Comp

Call Now!

Have a Question?

Let us know how we can help